米朗MR-2232-3 (3L) 稀油電動潤滑油泵微電腦型3L

MR-2232-3 (3L)      

稀油電動潤滑油泵微電腦型  Self-control Oil Lubrication Pump

技術參數Technical Parameters

*型號帶T為抵抗式，帶X為容積式,帶A為罩極電機,

*Mode name with " T" is resistant, mode name with “X” is volumetric,mode name with “A” is shade-pole motor

接線圖The wiring diagram

性能與特點Performance Characteristics

1 .加油時間由控制面板右側的上升（U P延長時間）和下降（D O W N縮短時間）按鍵設定，Z長加油時間可達2 0 0秒，精度為1秒。間歇時間由控制面板左側的上升（U P延長時間）和下降（D O W N縮短時間）按鍵設定，間歇時間Z長可達9 9 9分鐘， Z短為0 . 1分鐘， 精度為0 . 1分鐘。時間設定時,按一次按鍵， 跳動數為1，按住按鍵不放，跳動可以加速， 所有設定在設定完成后或按手動（M a n )按鍵后，即刻生效。

2 .當油泵顯示E R P報警時， 表示壓力不足，檢查壓力正常時， 按一下（M a n )按鍵，消除報警。

3 .當油泵顯示E R O時,表示油量不足，加油后自動消除報警。

4 .按?。∕ a n )按鍵不放為點動測試，可一直出油。

（ 可根據客戶需要定做專屬潤滑方案）

1.Fuel supply time is set by the UP button(extending the time) and DOWN button(shortening the time) on the right side of the control panel, which can reach up to 200 seconds, with the precision of 1 second. Intermittent time is set by the UP button(extending the time) and DOWN button(shortening the time) on the left side of the control panel, which can

reach up to 999 minutes, with the precision of 0.1 minute. When setting the time, the beat number is 1 if you press the button once. The beat number can be accelerated if you hold down the button. All the settings will take effect immediately after the setting is completed or after the Man button is pressed.

2.When the oil pump shows the EPR alarm, it indicates that the pressure is insufficient. If the the pressure is normal, press the Man button to eliminate the alarm.

3.When the oil pump shows the ERO alarm, the oil quantity is insufficient,and the alarm will be automatically eliminated after refueling .

4.Holding down the Man button is manual test.

(specific lubrication plan can be customized)